Automotive, crash tests, sports, aviation, harsh environments, test ranges, name it and our high speed camera's can be used, as shown by the case studies below.

Also customized projects are very common and as these papers show, no project is impossible for AOS Technologies!

• Case Studies
• Press releases

 

		The X-EMA camera underwent an extensive evaluation period with a world renowned military aircraft manufacturer. The camera was mounted in several positions including in the aircraft body and under the wings exposed to the natural environment.
		The X-CHASE is a handheld, self-contained high speed camera system to replace film-based cameras. Since film manufacturers have ceased the production of 16mm film recently, a digital replacement is finally available. The camera records a number of (customer settable) sub-buffers, which are automatically downloaded to the built-in CF card, and returns automatically to record mode after the data download is completed. A full CF card can be exchanged with an empty one in less than 15 seconds.
		Mass Rapid Transport operators have to balance the costs for inspection and maintenance with the reliability and performance of their system. Inspecting the extensive track systems for defects and imperfections to determine repair- and maintenance jobs is a must, but inspection costs have to be kept on a minimum. Archiving the inspection data for later reference is also a must.
		Monitoring the bottling process in the beverage industries Bottling  lines are running at 30,000 bottles per hour or faster. Deviations or failures are not visible with the human eye, nor can they be recorded with conventional cameras. Without seeing the cause of a malfunction, appropriate corrective action can not be taken
		Automatic can manufacturing machine. Bends and welds pre-cut and pre-printed metal sheets into seam-welded tubes. By using one MOTIONeer high speed camera, the sheet metal feeder could be optimised and adjusted to eliminate any kind of lockouts in the feeding process.
		High Speed Camera in Engine Movements Analysis Automotive – measuring the vibration and movements of the engine block during various driving tests (acceleration, breaking, cobblestone roads etc.). Goal: optimization of engine mounting blocks (rubber).
		Top view at car to car crash lab AOS Technologies is well known to provide engineering for special turn-key projects. Recently an application with multiple X-MOTION cameras was realized. The purpose was to get a top view at the car to car crash lab.
		Automotive sled test application AOS Technologies is well known to provide engineering for special turn-key projects. The purpose of this project is to provide users an economical, comfortable setup for a camera system for sled test applications. All operation can be executed from the central control room. A camera system consists of up to 4 high speed cameras and a Hi-G hub.
		IRIG-B with AOS cameras AOS cameras support IRIG B122 (100 PPS, Sine wave carrier, amplitude modulated, 1 kHz/1 millisecond resolution, BCD). Other formats on request. This paper describes three different possibilities how to record IRIG-B time stamped sequences with AOS cameras.
		SMIZE high-speed camera applications The SMIZE has been designed for situations where size is the decisive factor. It therefore fits perfectly in an extremely wide range of automotive and industrial applications.

 

X-EMA in Jane's Defence Review magazine

Editorial in Automotive Testing Technology Int'l about modular high speed cameras

UBS Article on AOS (German only)

High speed cameras not just for dummies